Pumps & Motors
Showing 61 to 80 of 173 products.
FEATURES
- Powered for Continuous Operation: All ratingsare within the working limits of the motor as recommended by themotor manufacturer. Pump can be operated continuously without damageto the motor.
- Field Serviceable: Units have left hand threadsand are field serviceable with common tools and readily availablerepair parts.
- Sand Handling Design: Our face clearance,floating impeller stack has proven itself for over 50 years as asuperior sand handling, durable pump design.
- FDA Compliant Non-Metallic Parts: Impellers,diffusers and bearing spiders are constructed of glass filledengineered composites. They are corrosion resistant andnon-toxic.
- Discharge Head/Check Valve: Cast 303 stainlesssteel for strength and durability. Two cast-in safety line loops forinstaller convenience. The built-in check valve is constructed ofstainless steel and FDA compliant BUNA rubber for abrasion resistanceand quiet operation.
- Motor Adapter: Cast 303 stainless steel forrigid, accurate alignment of pump and motor. Easy access to motormounting nuts using standard open end wrench.
- Stainless Steel Casing: Polished stainless steelis strong and corrosion resistant.
- Hex Shaft Design: Six sided shafts for positiveimpeller drive.
- Engineered Polymer Bearings: The proprietary,engineered polymer bearing material is strong and resistant toabrasion and wear. The enclosed upper bearing is mounted in a durableNoryl® bearing spider for excellent abrasion resistance.
Click on MORE INFO above to view the Technical Brochure.
FEATURES
Impeller: Cast iron, enclosed, non-clog, dynamically balanced with pump out vanes for mechanical seal protection.
Casing: Cast iron flanged volute type for maximum efficiency. Designed for easy installation on A10-20 slide rail or base elbow rail systems.
Mechanical Seal: SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers.
Shaft: Corrosion-resistant, 300 series stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
Fasteners: 300 series stainless steel.
Capable of running dry without damage to components. Designed for continuous operation when fully submerged.
EXTENDED WARRANTY AVAILABLE FOR RESIDENTIAL APPLICATIONS.
Click on MORE INFO above to view the Technical Brochure.
Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 50 years as a superior sand handling, durable pump design.
FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
Discharge Head: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience.
Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
Stainless Steel Casing: Polished stainless steelis strong and corrosion resistant.
Hex Shaft Design: Six sided shafts for positive impeller drive.
Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.
Check Valve: Screws into discharge head from the top, easily removed for drain-back systems or replacement without disassembling the pump. Spring loaded, o-ring poppet design for positive seal in all conditions.
Crimped Design: For strength, will not separate in the harshest conditions.
FEATURES
High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
Easy to Service: Can be taken apart for service by removing four bolts.
Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electrocoat paint process applied inside and out and then baked on.
Powered for Continuous Operation: Pump isdesigned for continuous operation. All ratings are within the motor manufacturer’s recommended working limits.
Convertible: Designed for use on shallow or deep well applications using appropriate Goulds Water Technology fittings.See the performance charts on the Technical Data Sheet for fittingorder numbers.
NSF Listed: The first NSF listed jet pumps in the industry. All jet pumps and shallow well components only, deep well components are not listed.
SPECIFICATIONS
Pump
Motor
Maximum temperature: 140ºF
SYSTEM COMPONENTS
- Packer System – well casing adapter AWJ2 (2") and turned coupling 64655.
- For Deep Well Systems – a pressure control valve such as an AV22KIT or AV22 plus a JDW tubing kit.
Additional Accessories Required:
Click on MORE INFO above toview the Technical Brochure.
- Features 6 Performance Ranges: 5, 7, 10, 15, 20, and 25 gpm.
- Horsepower Ranges: 1/2 - 5.
- Discharge Head and Motor Bracket Produced with Industry Proven, Engineered Materials.
- Available in 300 Series Stainless Steel or High QualityThermoplastic Resins.
- Large Wrench Flat Area on the Discharge Head for Ease ofInstallation.
- Dry Run Designed Top Bearing Positively Supports the 300 Series Stainless Steel 7/16-inch Hex Shaft.
- Removable Internal Check Valve.
- Powered by Franklin Electric Corrosion-Resistant Super Stainless4-inch Submersible Motors with Lightning Protection.
- Maximum Water Temperature with Proper Flow is 120øF/49øC. Consult Factory for Details.