Pumps & Motors

FEATURES

Manual regulator provided with deep well packages. Corrosion and abrasion resistant.

Shipping and carrying weight of the Quick-Set Jet is less than most conventional brands because heavy bolt-on or cast-on injectors are eliminated.

Quick-Set shallow well injector is resistant to wear and corrosion. They won't swell in water like components made of nylon, so you can count on constant performance. For deep well application, a deep well injector must be installed in the well.

Motor provides longlasting operation and easy replacement. Available in three horsepower versions - 1/2, 3/4 and 1 HP. Bug-proof and sand-proof motor casing assures longer lasting operation.

Completely convertible case fits 1/2, 3/4 and 1 HP models.

Rynite ®

diffuser is sealed to provide optimum corrosion and abrasion resistance. Warpage due to high temperatures is virtually eliminated.

20% glass-filled

Noryl ®

impeller is corrosion, abrasion and heat resistant.

1 hp2" DischargeDesigned for sewage applications. Higher flow rates allow use with 2"discharge lines.Operates on standard 115V or 230V 20A circuits.Features:Heavy cast iron construction115V or 230V 1-phase

• Patented V-Slicer cutter technology
• Shreds difficult solids such as feminine products, rags, towels and wipes that can jam a solids handling style pump
• Hardened stainless steel cutter and plate
• Oil-filled, thermally protected motor

PRG-Series grinders can be used as a replacement pump in 2" discharge systems using LE40 and LE50-series solids handling pumps.*Vertical switch model available in 115V

Deep Well Vertical Jet Pump (60 Hz)

Specifically designed for: Homes, Farms, Cottages

Features and Benefits

• NSF 61 Certified: Ensuring safety when used in drinking water systems
• High Capacity and Pressure: Specifically designed to deliver high capacities at deeper settings.
• Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
• Easy to Service: Can be taken apart for service by removing four bolts.
• Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electro-coated paint process applied inside and out and then baked on.
• Powered for Continuous Operation: Pump is designed for continuous operation. All ratings are within the motor manufacturer’s recommended working limits.
• Easy to Prime: Top mounted vent plug allows air to escape from seal cavity during initial priming.
• Adjustable Automatic Pressure Control Valve: Guarantees maximum capacity at all times. Bypass check valve equalizes pressure in entire system and helps prevent loss of prime.
• NSF Listed: The first NSF listed jet pumps in the industry. All jet pumps and shallow well components only, deep well componenets are not listed.

APPLICATIONS

Specifically designed for:

Homes

Farms

Cottages

SPECIFICATIONS

Pipe connection —

1" NPT drive (pressure)

1¼" NPT suction

1” NPT discharge

Pressure switch —

¾-1½ HP, AS4

2 HP, AS10

both preset (30-50 PSI)

NEMA standard

¾-1½ HP, 115/230 V, 60 Hz, capacitor start

2 HP, 230 V only, 60 Hz

Single phase

3500 RPM

Built-in overload with automatic reset

Stainless steel shaft

Rotation: clockwise when viewed from motor end.

140° F

Click on MORE INFO above to view the Technical Brochure.

The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry's most trusted residential pump motor. Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.