Wholesale Pump & Supply ProductsShop All Products
Shop All Products
Showing 21 to 40 of 256 products.
FEATURES:
- Durable pump construction made of 7/16 stainless steel with thermoplastic reinforcement
- Industry-leading drawdown of 4 1/4"
- Approved for Residential use: CSA/CUS Listed
- Built-in thermal overload protection with automatic reset
- Pump base accepts a 3" pipe to assist with height adjustments
- Discharge head with stainless steel insert
- Includesremovable filter screen
- Built-in check valve and capacitor
Cistern Pumps
Designed for use in gray water/filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1/8-inch without having a negative effect on the internal hydraulic components.The pump's unique bottom suction design allows for maximum fluid drawdown without compromising durability or overall life, and it does not require the use of as flow induction sleeve. Intended specifically for use in a cistern or tank, C1 Series pumps are suitable for use in agricultural, residential, and commercial installations.
Features:
Designed for use in gray water/filtered effluent service applications, the C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1/8-inch without having a negative effect on the internal hydraulic components.The pump's unique bottom suction design allows for maximum fluid drawdown without compromising durability or overall life, and it does not require the use of as flow induction sleeve. Intended specifically for use in a cistern or tank, C1 Series pumps are suitable for use in agricultural, residential, and commercial installations.
Features:
- Exclusive Sand Fighter sealing system
- Corrosion-resistant construction
- Stainless steel splined shaft
- Advanced Power-Dense 24-slot stator to maximize available horsepower per linear inch of motor length
- Hermetically-sealed windings
- Anti-track, self-healing resin system repairs minor shorts
- Water-lubricated bearings
- Filter check valve
- Kingsbury-type thrust bearing rated for 1,500 lbs.downthrust
- Pressure-equalizing diaphragm
- Removable Water-Bloc lead (sold separately)
- NEMA pump mounting dimensions
- UL 778 recognized
- CSA C22.2 #108 certified
The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry's most trusted residential pump motor. Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.
Goulds 10G05412CL 1/2 HP 230V Submersible Water Well Pump 10GPM 1/2HP, Single Phase, 12 Stages, 230 Volts, 3 Wire, 10 GPM
The Goulds 10G Streamline Submersible Pump can be operated continuously without damage to the motor. Its units are field serviceable with common tools and readily available repair parts. Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites, and are corrosion resistant and non toxic. Cast lead-free silicon bronze discharge head is strong and durable. This pump comes with an external, lead free, silicon bronze check valve with plastic poppet and BUNA o-ring seal. These below ground pumps are designed for residential and small municipal water supply as well as light irrigation applications. Specifications: -Control Box: REQUIRED* - Horsepower: 1/2 - Phase: Single - Volts: 230 - Stages: 12 - Type: 3 Wire - Recommended Flow Range: 1.2 GPM- 7.5 GPM *CONTROL BOX REQUIRED BUT IS NOT INCLUDED
Basic Features
- Corrosion-resistant stainless steel exterior
- Stainless steel splined shaft
- Hermetically-sealed windings
- StatorShield resin system
- Filter check valve
- Water lubrication
- Kingsbury-type thrust bearing
- Pressure-equalizing diaphragm
- Built-in lightning arrestors (all single-phase; 200 & 300 Vthree-phase)
- Removable Water-Bloc lead
- Franklin-manufactured control boxes available for single-phasemotors
- UL 778 recognized (North American voltages)
- CSA certified
- ANSI/NSF 61 certified
- Industry standard NEMA mounting dimensions
Features:
- Pump down operation
- Heavy-duty contacts
- Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
- Adjustable pumping range of 7 - 36 inches (18 -91 cm)
- Includes standard mounting clamp and boxed packaging
- SJE PumpMaster® pump switch on/off position diagram
Options:
- Pump up or pump down applications as specified by part number available
- 120 VAC or 230 VAC piggy-back plug available
- Without a plug for direct wiring in 120 VAC or 230 VAC applications available
- In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) - longer lengths available
UL Recognized, CSA Certified
Five-Year Limited Warranty
Construction:
Annealed bare stranded copper conductors PVC insulated and run parallel with a PVC black jacket to form a 75°C 600 Volt Multi-Conductor Submersible Pump Cable. UL Listed per UL 83 Type THW as Deep Well Submersible Pump Cable.
Features:
- Resistant to acid, abrasion, alkalis, flame, gas and oil.
- Water and sunlight resistant
- Cable is sequentially marked.
Construction:
Annealed bare stranded copper conductors PVC insulated and runparallel with a PVC black jacket to form a 75°C 600 VoltMulti-Conductor Submersible Pump Cable. UL Listed per UL 83 Type THWas Deep Well Submersible Pump Cable.
Features:
- Resistant to acid, abrasion, alkalis, flame, gas and oil.
- Water and sunlight resistant
- Cable is sequentiallymarked.
Features:
- 6 performance ranges: 5, 7, 10, 15, 20, and 25 gpm
- Horsepower ranges: 1/2 - 5
- Discharge head and motor bracket produced with industry proven,engineered materials.
- Available in 300 series stainless steel or highquality thermoplastic resins
- Large wrench flat area on the discharge head for ease of installation
- Dry run designed top bearing positively supports the 300 series stainless steel 7/16-inch hex shaft
- Removable internal check valve
- Powered by Franklin Electric corrosion-resistant super stainless4-inch submersible motors with lightning protection
- Maximum water temperature with proper flow is 120 °F/49 °C. Consult factory for details.
Franklin Electric Series V Submersible Pump
- Features 6 Performance Ranges: 5, 7, 10, 15, 20, and 25 gpm.
- Horsepower Ranges: 1/2 - 5.
- Discharge Head and Motor Bracket Produced with Industry Proven,Engineered Materials.
- Available in 300 Series Stainless Steel or HighQuality Thermoplastic Resins.
- Large Wrench Flat Area on the Discharge Head for Ease of Installation.
- Dry Run Designed Top Bearing Positively Supports the 300 SeriesStainless Steel 7/16-inch Hex Shaft.
- Removable Internal Check Valve.
- Powered by Franklin Electric Corrosion-Resistant Super Stainless4-inch Submersible Motors with Lightning Protection.
- Maximum Water Temperature with Proper Flow is 120øF/49øC. Consult Factory for Details.
Franklin Electric Series V Submersible Pump
- Features 6 Performance Ranges: 5, 7, 10, 15, 20, and 25 gpm.
- Horsepower Ranges: 1/2 - 5.
- Discharge Head and Motor Bracket Produced with Industry Proven,Engineered Materials.
- Available in 300 Series Stainless Steel or High QualityThermoplastic Resins.
- Large Wrench Flat Area on the Discharge Head for Ease of Installation.
- Dry Run Designed Top Bearing Positively Supports the 300 SeriesStainless Steel 7/16-inch Hex Shaft.
- Removable Internal Check Valve.
- Powered by Franklin Electric Corrosion-Resistant Super Stainless 4-inch Submersible Motors with Lightning Protection.
- Maximum Water Temperature with Proper Flow is 120øF/49øC. Consult Factory for Details.